Grade 80 Hammerlok
Features
- Australian standard: AS 3776
- Chain Size 6 – 32 mm
- Used to connect grade 80 chain to an oblong link, hook or other component.
- Traditional design in a yellow painted finish for easy identification.
- Each connecting link or body half shall not have in use, more than one load-bearing component or chain.
- Always allow for sufficient articulation and avoid over-crowding to ensure the load will be transmitted axially.
- For reassembly of connectors, a new pin and stud assembly is recommended.
Specifications
Chain Size (mm) |
WLL (tonnes) |
K (mm) |
A (mm) |
B (mm) |
D (mm) |
Mass (kg) |
Part No. | Yoke Part No. | Markings |
6.0 | 1.1 | 44 | 15 | 17 | 7 | 0.08 | 40835Y | 8-015-06 | 6-8 |
7.1/8..0 | 2.0 | 57 | 18 | 22 | 9 | 0.2 | 40836Y | 8-015-07 | 7 + 8-8 |
10.0 | 3.2 | 68 | 25 | 26 | 11 | 0.3 | 40837Y | 8-015-10 | 10-8 3/8” |
13.0 | 5.3 | 91 | 30 | 35 | 16 | 0.7 | 40838Y | 8-015-13 | 13-8 1/2” |
16.0 | 8.0 | 100 | 36 | 38 | 19 | 1.1 | 40840Y | 8-015-16 | 16-8 5/8” |
20.0 | 12.5 | 122 | 42 | 46 | 22 | 1.9 | 40841Y | 8-015-20 | 18/20-8 3/4” |
22.0 | 15.0 | 152 | 49 | 59 | 24 | 3.0 | 40842Y | 8-015-22 | 22-8 7/8″ |
26.0 | 21.2 | 162 | 55 | 62 | 30 | 4.7 | 40843Y | 8-015-26 | 26-8 1″ |
32.0 | 31.5 | 202 | 69 | 79 | 36 | 8.8 | 40844Y | 8-015-32 | 32-8 1-1/4″ |
Applications
- Used in chain slings, connecting chains
- Ideal for a wide range of lifting and moving applications